ProFyre Analogue Addressable Sounder Circuit Controller

Key Features
Addressed with dip switches or a hand-held programmer
Integral bi-directional short circuit isolator
Visible status, fault and alarm LED indication
Additional input for monitoring a remote power supply unit
Surface or Semi-flush mounting

Overview

The Addressable Sounder Circuit Controller is designed to run conventional style alarm devices such as electronic sounders, bells and beacons, where the current consumption prohibits the use of ProFyre addressable loop powered devices. The module also includes input terminals to monitor a remote power supply.

The module is not loop powered. A suitable 24Vdc input is required with the necessary battery back-up compacity. Note: the external supply should provide adequate current to operate the ProFyre Addressable Sounder Circuit Controller in addition to operating the connected alarm load.

A bi-directional short-circuit isolator has been fitted to the interface module to ensure continued funtionality in the event of a short-circuit on either the loop in or out terminals.

The interface is supplied with a back box incorporating four 20mm knock-outs and three mini trunking knock-outs for surface mounting purposes. The device is also compact enough to be mounted directly on to a double European back box for semi-flush mounting. To minimise any damage during installation, all electronics are protected by a cover. The ProFyre Addressable Sounder Circuit Controller has an ingress protection rating of IP21C (with back box) for internal use only.

The ProFyre Addressable Sounder Circuit Controller is compatible with the analogue addressable ProFyre A4, A2 and T8 2-wire fire alarm systems.

Approvals

Intertek

CPR

0359-CPR-00472

Tech Specs

Type

Addressable Sounder Circuit Controller

Operating Voltage (Loop)

17 to 28Vdc

Quiescent Current (Loop)

0.6mA

Fault Current (Loop)

0.6mA

Sounder On Current (Loop)

20.8mA

Operating Voltage (External Power)

9-32Vdc

Quiescent Current (External @ 24V)

2mA

Sounder On Current (External @ 9V)

2.5mA Plus Sounder Load

Sounder On Current (External @ 32V)

9.5mA Plus Sounder Load

Sounder Output Rating

500mA

Isolating Current

7.3mA

Sounder End of Line

10k

Operating Conditions

Tested to: -10°C to +55°C (14°F to 131°F)

Humidity: 0% to 95% RH, non-condensing

IP Rating

IP21C

Design Environment

Indoor Use Only

Weight

0.22kg

Part Codes

17-050 ProFyre A2 64 (1 Loop, 64 Devices) Analogue Addressable Fire Alarm Panel (Metal Enclosure)

Downloads

Datasheets

Approvals

Contact Us