ProFyre Analogue Addressable Sandwich Sounder

Key Features
Loop Powered
Common Sounder Group
Individual Activation using the Detectors Remote LED Output
Individual Address via the hand-held programmer
Low Current Consumption

Overview

ProFyre Analogue Addressable Sandwich Sounder

The Addressable Sandwich Sounder is an addressable loop powered platform sounder/visual indicator device controlled by the fire alarm control. The sounder has been designed to provide a range of tones with a maximum output of up to 100dB(A) (±2dB). Details of the tones range can be found in the table below.


Approvals Icon

Approvals

Approval Label

The ProFyre Analogue Addressable Sandwich Sounder is fully approved by LPCB for safe use and installation in any European Union country and bears the CE mark to show that it complies with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).

  • EN54-3:2001 + A1:2002 + A2:2006
    Sounders

Sound Icon

Audibility Solution

ProFyre Analogue Addressable Sandwich Sounder Exploded View

Every smoke or heat detector has the ability to be paired with a sandwich sounder eliminating the replacement and extra installation cost of a sounder base if audibility is an issue.


Tick Icon

Compatible Detectors

ProFyre Addressable Detectors

The unit has been designed to fit between any ProFyre detector base and ProFyre analogue addressable detector.


Tick Icon

ProFyre Compatible Addressable Panels

ProFyre Addressable Panels

The ProFyre analogue addressable sandwich sounder has been designed to complement the ProFyre A4 and A2 analogue addressable control panels & the ProFyre T8 2-wire system.


At default, the ProFyre Addressable Sandwich Sounder once configured, will migrate to the common sounder group address. Individual signalling is carried out via the ProFyre detector remote LED output or can be given a unique address via the hand-held programmer.

Each device has an ingress protection rating of IP21C and is for internal use only. The addressable sandwich sounder is compatible with the analogue addressable ProFyre A4, A2 and T8 2-wire fire alarm systems.


Tech Specs

Alarm Tones

Tone: BS Fire (Default)

Pattern: Alternating

Frequency: 800 & 970

Tone: 1Hz (500ms - 500ms)

dB(A): 96 (±2dB)

Tone: BS Fire

Pattern: Alternating

Frequency: 800 & 970

Tone: 2Hz (250ms - 250ms)

dB(A): 95 (±2dB)

Tone: BS Fire

Pattern: Sweep

Frequency: 800 & 970

Tone: 1Hz (1 Per Second)

dB(A): 98 (±2dB)

Tone: BS Fire

Pattern: Sweep

Frequency: 800 & 970

Tone: 7Hz (7 Per Second)

dB(A): 99 (±2dB)

Tone: BS Fire

Pattern: Sweep

Frequency: 800 & 970

Tone: 50Hz (50 Per Second)

dB(A): 99 (±2dB)

Tone: BS Fire

Pattern: Alternating

Frequency: 510 & 610

Tone: 1Hz (500ms - 500ms)

dB(A): 100 (±2dB)

Tone: German Fire (NIN 33 404)

Pattern: Sweep (DIN)

Frequency: 1200 to 500

Tone: 1Hz

dB(A): 99 (±2dB)

Tone: French Fire (NFS 32-001)

Pattern: Alternating

Frequency: 554 & 440

Tone: 100ms - 400ms

dB(A): 95 (±2dB)

Tone: Dutch Fire (NEN 2575)

Pattern: Slow Whoop

Frequency: 500 & 1200

Tone: 3.5s Sweep, 0.5s Silence, then repeat

dB(A): 98 (±2dB)

Tone: PFEER Toxic Gas

Pattern: Continuous

Frequency: 970

Tone: Steady

dB(A): 95 (±2dB)

Tone: PFEER Alert

Pattern: Intermittent

Frequency: 970

Tone: 0.5 Hz (1s On / 1s Off)

dB(A): 92 (±2dB)

Tech Specs

Type

Addressable Sandwich Sounder

Operating Voltage (Loop)

17 to 28Vdc

Quiescent Current

650μA

Alarm Current

5.5mA

Alarm Tones

See Tones Table

Operating Conditions

Tested to: -10°C to +55°C (14°F to 131°F)

Humidity: 0% to 95% RH, non-condensing

IP Rating

IP21C

Design Environment

Indoor Use Only

Weight

0.16kg

Ordering Information

16-010 ProFyre Addressable Sandwich Sounder (Loop Powered)

Contact Us