FyreLine Mounting Clips & Accessories

Key Features
Compatible with FyreLine Analogue and Digital LHD Systems
BS 5839-1 Compliant
Zintec and Stainless Options

Overview

The FyreLine Zintec and Stainless Steel mounting accessories have been specifically chosen to comply with the latest requirements detailed in BS 5839-1 (Code of practice for design, installation, commissioning and maintenance of fire detection and fire alarm systems for buildings).

Section 26.2 Part F states that:

Methods of cable support should be non-combustible and such that circuit integrity will not be reduced below that afforded by the cable used, and should withstand a similar temperature and duration to that of the cable, while maintaining adequate support.

NOTE 8 In effect, this recommendation precludes the use of plastic cable clips, cable ties or trunking, where these products are the means of cable support.

NOTE 9 Experience has shown that collapse of cables, supported only by plastic cable trunking, can create a serious hazard for firefighters, who could become entangled in the cables.

Zintec mounting accessories are suitable for general indoor and outdoor use. Stainless steel mounting accessories are suitable for indoor and outdoor use and in environments where the clip may be exposed to harsh chemicals e.g. hydrocarbons or in a caustic environment.

Mounting Clips

Standard L-Clip

18-300 Zintec Steel c/w High Temperature Silicone Pads, 25 Pack
18-301 Zintec Steel c/w High Temperature Silicone Pads, 100 Pack
18-302 Stainless Steel c/w High Temperature Silicone Pads, 100 Pack
Dimensions 50mm Height

Dual Height L-Clip

18-302 Zintec Steel c/w High Temperature Silicone Pads, 100 Pack
18-311 Stainless Steel c/w High Temperature Silicone Pads, 100 Pack
Dimensions 100mm Height

Channel Bracket

18-303 Zintec Steel c/w High Temperature Silicone Pads, 100 Pack
18-312 Stainless Steel c/w High Temperature Silicone Pads, 100 Pack
Dimensions (H) 60mm x (W) 50mm

200mm L-Clip

18-304 Zintec Steel c/w High Temperature Silicone Pads, 100 Pack
18-314 Stainless Steel c/w High Temperature Silicone Pads, 100 Pack
Dimensions 200mm Height or Width

Distance Piece

18-305 Zintec Steel, 100 Pack
18-315 Stainless Steel, 100 Pack
Dimensions 200mm Height or Width

V-Clip

18-313 Stainless Steel, 100 Pack
Dimensions (H) 50mm x (W) 120mm

Pipe Clip

18-306 Zintec Steel, 100 Pack
18-316 Stainless Steel, 100 Pack
Dimensions (H) 60mm x (W) 50mm

Accessories

Beam Clip

18-340 Beam Clip (2-3mm), 100 Pack
18-341 Beam Clip (3-8mm), 100 Pack
18-342 Beam Clip (8-14mm), 100 Pack
18-343 Beam Clip (14-20mm), 100 Pack

Indoor/Outdoor UV & Heat Stabilised Tie Wrap

18-320 110°C Constant Rated Indoor/Outdoor Tie Wrap, 100 Pack

Extra High Temperature Indoor Heat Stabilised Tie Wrap

18-321 170°C Constant Rated Indoor Tie Wrap, 100 Pack

High Temperature Indoor/Outdoor Stainless Tie Wrap

18-322 High Temperature Stainless Steel Indoor/Outdoor Tie Trap, 100 Pack
18-331 Hand Tool for Stainless Steel Tie Wrap

High Temperature Silicone Pads

Silicone pads insulate and protect the LHD cable from abrasion, excessive pressure and any heat transfer from a metal mounting bracket to the cable, which may affect the operation of the cable.

18-330 Silicone Pad, 100 Pack
Dimensions 25mm2 x 1mm

Junction Box

The junction box is a quick and efficient method of interconnecting and joining lengths of an FyreLine Linear Heat Sensing Cable. It can also be used as an in-line junction box for the incoming leader cable.

It comes supplied with two glands, and has a five-way DIN rail mounted terminal block within.

18-131 Junction Box
Dimensions (W) 94mm x (H) 94mm x (D) 57mm

Contact Us