Key Features
Cost effectively installs on existing ICAM ASD pipe network
Centralized monitoring for real-time awareness
Each ICAM ECO detector is pre-configured with one or two sensors
Simple expansion to monitor multiple gases
Integrates with PLCs/HVAC/BMS/FACP

Overview

Gas Detection for Use with Aspirated Smoke Detection

Xtralis the manufacturer of the market leading ICAM aspirating smoke detection (ASD) technology has developed the industries first multi-hole aspirated gas detector.

When used with the ICAM range of ASD products; ICAM ECO provides the industries 1st combine aspirated smoke and gas detection system. ICAM ECO provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property whilst ensuring business continuity.

How it Works

ICAM ECO uses an existing or new ICAM aspirating pipe network to actively monitor for gas escapes and build-ups.

Each ECO gas detector can house up to two gas sensors, and additional detectors can be added easily to the ICAM pipe network to monitor more gases if required. Pre-calibrated sensor cartridges are easily replaced in the field and make converting to different gas sensors or replacing sensors a simple task.

The ICAM ECO detector is configured using Xtralis VSC configuration software and can be remotely monitored using Xtralis VSM4 monitoring software. Both VSC and VSM can be used to download data from the onboard memory card for data analysis and trending of historical data.

Integration with other building systems, including fire alarm control panels, PLCs, HVAC and building management systems, provides real-time situational awareness for intelligent emergency response.

ICAM ECO by Xtralis provides significant installation and routine maintenance cost savings over conventional multi-point gas detection solutions, by reducing the number of detectors required to cover an area and by providing easy access for routine maintenance.

Hazardous area certified variants of ICAM ECO are available (Approval pending).

Installation

ICAM ECO is designed to press fit onto ICAM air-sampling pipe work. To fit ICAM ECO simply remove a 60 mm section of pipe when using 25 mm OD airsampling pipe work or 4” for ¾” BSP pipe. ICAM ECO provides total flexibility to install one or more detectors anywhere on the pipe network enabling monitoring of a specific point, zone or total area.

Additional Features

  • Simple inline installation
  • 4-wire RS485 Modbus network
  • Configurable relays
  • 4-20 mA analogue outputs
  • On-board data logging

Each ECO detector can house up to two gas sensors, and additional detectors can be added easily to the pipe network to monitor more gases if required. The enhanced ECO can be configured to detect:

Eco Gas Chart

Applications

Battery-charging rooms
Underground utility tunnels
Boiler rooms
Warehouses
Manufacturing facilities
Parking garages
Transportation centers

Approvals

EMC
FCC 47CFR Part15B class B
ICES 003 
EN 50270, CE
ETL listed to UL 61010-1 (pending)
ETL listed to CAN/CSA C22.2 (pending)
No.61010-1 (pending)
EN 61010-1 (pending)

Tech Specs

Supply Voltage

18-30 VDC

Power Consumption @ 24 VDC

3.6W (max)

Current Consumption

Typically 60 mA @ 24 VDC for a dual gas (flammable/toxic) quiescent.

85 mA when in alarm

Dimensions (W x H x D)

34 mm x 125 mm x 110 mm

(1.3” x 4.9” x 4.4”)

Weight

250 g (0.6 pounds)

IP/NEMA ratings

IP65 and NEMA 4

Operating Conditions

Temperature typically -20ºC to 50ºC

(-4ºF to 122ºF) gas dependant

O2 - 20ºC to 55ºC (-4ºF to 131ºF)

NH3 -20ºC to 40ºC (-4ºF to 104ºF)

Humidity: 10-95% RH, non-condensing

Pipe Size

External Diameter 25mm (EU), ¾” (US/CAN)

Wire/Terminal size

1.5 mm2 16 AWG maximum

Cable Access and Termination

2 x PG9 cable glands, to suit 4.0 to 8.5 mm

(0.157” to 0.335”) outer cable diameter

Accuracy

+/- 5%

Outputs

4 wire RS 485 Modbus RTU

(2 wire data comms + 2 wire power)

Four (4) programmable relays 30 VDC 1A

One (1) 4-20 mA output per sensor

Onboard Memory Card

Micro SD card 2 GB (50,000 events)

Part Codes

ECO Detector Single Gas (Relay, 4-20mA, RS485)

ECO-D-B-11

Hydrogen (H2) 0-100% LEL

ECO-D-B-12

Methane (CH4) 0-100% LEL

ECO-D-B-13

Propane (C3H8) 0-100% LEL

ECO-D-B-31

Oxygen (O2) 0-25% VOL

ECO-D-B-41

Carbon Monoxide (CO) 0-500 PPM

ECO-D-B-42

Ammonia (NH3) 0-100 PPM

ECO-D-B-43

Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-B-44

Sulfur Dioxide (SO2) 0-10 PPM

ECO-D-B-45

Nitrogen Dioxide (NO2) 0-10 PPM

ECO Detector Dual Gas (Relay, 4-20mA, RS485)

ECO-D-B-11-31

Hydrogen (H2) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-B-12-31

Methane (CH4) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-B-12-41

Methane (CH4) 0-100% LEL + Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-B-13-31

Propane (C3H8) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-B-31-41

Oxygen (O2) 0-25% VOL + Carbon Monoxide (CO) 0-500 PPM

ECO-D-B-41-43

Carbon Monoxide (CO) 0-500 PPM + Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-B-41-45

Carbon Monoxide (CO) 0-500 PPM + Nitrogen Dioxide (NO2) 0-10 PPM

ECO Single Gas Replacement Cartridge

ECO-SC-11

Hydrogen (H2) 0-100% LEL

ECO-SC-12

Methane (CH4) 0-100% LEL

ECO-SC-13

Propane (C3H8) 0-100% LEL

ECO-SC-31

Oxygen (O2) 0-25% VOL

ECO-SC-41

Carbon Monoxide (CO) 0-500 PPM

ECO-SC-42

Ammonia (NH3) 0-100 PPM

ECO-SC-43

Hydrogen Sulfide (H2S) 0-100 PPM

ECO-SC-44

Sulfur Dioxide (SO2) 0-10 PPM

ECO-SC-45

Nitrogen Dioxide (NO2) 0-10 PPM

ECO Dual Gas Replacement Cartridge

ECO-D-SC-11-31

Hydrogen (H2) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-SC-12-31

Methane (CH4) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-SC-12-41

Methane (CH4) 0-100% LEL + Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-SC-13-31

Propane (C3H8) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-SC-31-41

Oxygen (O2) 0-25% VOL + Carbon Monoxide (CO) 0-500 PPM

ECO-D-SC-41-43

Carbon Monoxide (CO) 0-500 PPM + Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-SC-41-45

Carbon Monoxide (CO) 0-500 PPM + Nitrogen Dioxide (NO2) 0-10 PPM

ECO Single Gas (Relay Only)

ECO-D-R-11

Hydrogen (H2) 0-100% LEL

ECO-D-R-12

Methane (CH4) 0-100% LEL

ECO-D-R-13

Propane (C3H8) 0-100% LEL

ECO-D-R-31

Oxygen (O2) 0-25% VOL

ECO-D-R-41

Carbon Monoxide (CO) 0-500 PPM

ECO-D-R-42

Ammonia (NH3) 0-100 PPM

ECO-D-R-43

Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-R-44

Sulfur Dioxide (SO2) 0-10 PPM

ECO-D-R-45

Nitrogen Dioxide (NO2) 0-10 PPM

ECO Dual Gas (Relay Only)

ECO-D-R-11-31

Hydrogen (H2) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-R-12-31

Methane (CH4) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-R-12-41

Methane (CH4) 0-100% LEL + Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-R-13-31

Propane (C3H8) 0-100% LEL + Oxygen (O2) 0-25% VOL

ECO-D-R-31-41

Oxygen (O2) 0-25% VOL + Carbon Monoxide (CO) 0-500 PPM

ECO-D-R-41-43

Carbon Monoxide (CO) 0-500 PPM + Hydrogen Sulfide (H2S) 0-100 PPM

ECO-D-R-41-45

Carbon Monoxide (CO) 0-500 PPM + Nitrogen Dioxide (NO2) 0-10 PPM

 

ECO Gas Detector Acessories

ECO-PA-25-08

ECO 25mm Male to 8mm Female Exhaust Pipe Adaptor

ECO-FT15PA-A

ECO FT15 Exhaust Pipe Adaptor, 2 x 25mm to 8mm c/w Clips (rqs 8mm Tube)

ECO-FT15PA-B

ECO Exhaust Adaptor Assembly, 1.5m x 8mm Tube to 25mm Pipe Assy c/w Clips

Contact Us